Перейти к контенту
          Каталог товаров

MH7201F


Гость DeeGraf

Recommended Posts

Hi!

I've got a MD362115?

I use the USB-Dongle from EVOScan for MH7201F's and a Openport 1.3u.

As Software for Reading out i use MMCFlasher. I can read out my Ecu, but not Write. I got always identity Errors.

That i can read out my ECU i have to START my engine, put in the cable and then i got only one chance to read out.

All following operations don't work. Only the first operation after put in the cable works, after i get Identity Errors

at all operations. Only with ignition on i get Identity Errors from begining.

Please help me.

Engine: 4g93 GDI

ECU ID: E53F

HW: MD362115

SW: EM1325

CPU: MH7201F

Thanks in advace

Ссылка на комментарий
Поделиться на других сайтах

Please be registered here at a forum. You can read flash, but can't write? Make a program screen when it gives out an error. This module was tested with interface Open port 2.0.

Ссылка на комментарий
Поделиться на других сайтах

At me unfortunately isn't present at present Open port 1.3. Specify at Evoscan, from it bought many such modules, whether there are those who use such interface. I think there is no pressure for rewriting on boot pin.

Ссылка на комментарий
Поделиться на других сайтах

You can try to write it with open port 1.3 use at settings "use manual boot pin". Software will tell you, when you must plug +16 or +18V on boot pin. If not work, then by OP 2.0.

Ссылка на комментарий
Поделиться на других сайтах

Here's my Rom

I Used Analyzer.exe for finding Maps.

I Found some of the maps.

High and low Octane Fuel i'm 99% Sure that it is True.

For those i only not found the RPM and Load Scale.

Other maps i dont know what is what, i added them into the konck filter maps that you can find the

Offsets.

Do you have any idea why MMCFlasher stops wrtitng after a few seconds?

approximately 20 sec then the bar stands still.

Regards

Ссылка на комментарий
Поделиться на других сайтах

Other question, where can i get software updates for the MMCFlasher software?

I'm not sure if my version is the newest. I bought it from evosan. But the

site is ipdating very slow and there are no updates for mmcflash.

What about the ROM. Can you do anything with, or do you need more files or anything?

I'd like to help you if i can.

Regards

Rom n XML.zip

Ссылка на комментарий
Поделиться на других сайтах

  • 2 weeks later...

Hi!

I just wanted to know how you move forward?

Can you give me the newest version of MMCFlasher please?

I want to make sure that the error does not come from the software.

I have read on the evoscan page that a new version is available from MMCfalsher.

However, the page wasnt renewed since looong time, and this is why no update is available on the site.

Do you need anything for easyer create the XML?

Like Engine model or anything?

Regards!

Ссылка на комментарий
Поделиться на других сайтах

  • 2 weeks later...

I have similar problem, but I can't even read ECU - Identity errors

MMCFlash + OP2 cable

Engine: 4g93 GDI

HW: MD351866 E2T68374

CPU: MH7201F

Pics: http://www.evoscan.com/helpdesk/download_attachment.php?att_id=167&track=JQ6JU4VYSD

http://www.evoscan.com/helpdesk/download_attachment.php?att_id=168&track=JQ6JU4VYSD

Any suggestions?

Ссылка на комментарий
Поделиться на других сайтах

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Гость
Ответить в этой теме...

×   Вы вставили отформатированный текст.   Удалить форматирование

  Only 75 emoji are allowed.

×   Ваша ссылка была автоматически заменена на медиа-контент.   Отображать как ссылку

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Зарузка...
×
×
  • Создать...