MMCflash for Mitsubishi Colt CZT

[the dog]

I would like to flash a Mitsubishi Colt CZT ecu but I need checksum correction

Is this tool up to it?

What option do I need from the product package and how can I buy it?

I have been trying for over 3 weeks to get in touch with evoscan but I got no response from them.

I need the tool asap .Today is possible.

I am from Nicosia Cyprus

[Bruce Willis]

Hello!

What CPU in your Colt? If 8304, than it is 2 module and he can make checksum correction.

[koz]

Hello!

What CPU in your Colt? If 8304, than it is 2 module and he can make checksum correction.

do you have to open the ECU to find out what the CPU is ? can you deduct that from the label on the ecu ?

[the dog]

I am trying to clone a stock ecu onto an identical ecu (label and serial) for testing the mmcflash.

I used MH8304F to read and the read look ok.

I was able to flash it to the spare ecu but when I can not get it to work on the car. I didnt do any checksum correction since i am 100% sure that the stock is fine.

Maybe the file is more than 512kb?

I read both ecu and compare them in hex and the 2 reads are identical

[Bruce Willis]

Where the bin file?

What does not work? What error?

[the dog]

Ecu is a mh8104f

[the dog]

The tool can write on czt without issues.

There is an issue with checksum correction.

On 1 CZT the checksum correction is working ok,but on another it is not...

[Colt_4G15T]

I'm from Austria and I also would like to use MMC-Flash to do a reflash of my colt czt 2005.

Could somebody help me because there is no Evoscan support ??

The Evoscan instruction says that you need pin 11 and pin 7 on the obd-2 port but I only got pin 14 and pin 6...

[Bruce Willis]

Can you have a photo?

[Colt_4G15T]

What do you mean?

[СаняЖД]

Picture your ECU give us. And we will tell you how to connect directly to ECU.

[Bruce Willis]

And photo OBD connector

[Colt_4G15T]

Foto OBD connector: http://www.imgbox.de/show/img/dGikA47YwW.JPG

http://www.imgbox.de/show/img/cxExSvQWQM.JPG

Thanks!!

Could you guys provide a licence for MMC-Flash??

[СаняЖД]

need a photo ecu connectors

[Colt_4G15T]

ECU: Моя ссылка

ECU connectors: Моя ссылка

Thank you!

[Bruce Willis]

try this colt 2004-2008

[Colt_4G15T]

Thanks!! And does this work without Mmc-flasher or do I have to buy a licence for version 2 mmc flash??

[СаняЖД]

what version 2? there is no discussion of "version 2"!

"Version 2" is a fake.

The MMC-flasher and the desired module you can buy here.

[Colt_4G15T]

Ok, I'm trying to read it next days.

Pin 121-K-line must be OBD 7

136-boot must be OBD 11 (reflash connector)

77,82 must be OBD 16 (power 12V)

93 must be OBD 4

Is that right??

[Bruce Willis]

What license do you have? Number of kye?

[Colt_4G15T]

I do not have any licence

[СаняЖД]

you bought a usb-dongle(key) from MMC-flasher here ?

[Colt_4G15T]

No! But I'm going to buy module 2 dongle

otherwise I can't write back to ecu..

[СаняЖД]

Ok. Today will explain how to do it.

[Colt_4G15T]

Thanks a lot!!