Перейти к контенту
          Каталог товаров

Recommended Posts

Опубликовано

Hello, 

Has anyone ever used transtron module 70, for flashing Case  excavator with 4HK1 over OBD?
I managed to read without any problems, but I  have some people telling me that writing tends to fail, which is why people do them with KTAG in BDM.
Any truth behind that or just false stories?
Since I dont have KTAG at my disposal I would rather not take the risk, if the mmc obd solution is still rather in beta development stage.


 

170454165_228629362377309_5809173534174176937_n.jpg

164941005_485404715928136_8786154165044626109_n.jpg

166179082_459259358757613_8366106389376011102_n.jpg

  • 4 months later...
Опубликовано
3 часа назад, brookhaven66 сказал:

i asked support few days back,support tell me to ask "Bruce Willis' in forum. It's exact same ecu as "4KH1 safe" thread

I guess i can try support again

5 days back you don't send ECU photo and i gave link how need to ask pinoout, i gave you th same link as in my last post on this theatred. And i don't write you to ask any body, just link how need ask pinout in support, with ecu photo and connector photo.  Don't need write here, write to suport 1 good request and wait answer.

  • 2 weeks later...
  • 2 months later...
  • 2 months later...
Опубликовано

Today I tried to write the same ecu in eobd, it has been read perfectly, but when I went to write the mod file, it told me correct checksum and the writing has finished, it showed write ok, but the machine does not start, now I can not communicate with the ecu in eobd, what has happened?  How can I recover the ecu?

Опубликовано
29 минут назад, eljisu сказал:

Today I tried to write the same ecu in eobd, it has been read perfectly, but when I went to write the mod file, it told me correct checksum and the writing has finished, it showed write ok, but the machine does not start, now I can not communicate with the ecu in eobd, what has happened? How can I recover the ecu?

Hello I can Help you. please tell me more details. what is engine model? what is ecu? post some ecu photo too i can help you. first at all write ori file back. and check ecu communication ok or not. 

Опубликовано
22 часа назад, eljisu сказал:

Today I tried to write the same ecu in eobd, it has been read perfectly, but when I went to write the mod file, it told me correct checksum and the writing has finished, it showed write ok, but the machine does not start, now I can not communicate with the ecu in eobd, what has happened?  How can I recover the ecu?

You write bad bin file. Now recovery only piasini, k-tag etc

  • 2 weeks later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Гость
Ответить в этой теме...

×   Вы вставили отформатированный текст.   Удалить форматирование

  Only 75 emoji are allowed.

×   Ваша ссылка была автоматически заменена на медиа-контент.   Отображать как ссылку

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Зарузка...
×
×
  • Создать...