regul8r Опубликовано 26 Июня 2020 Жалоба Опубликовано 26 Июня 2020 I have a 1998 Mitsubishi RVR that has an ECU with two 7202f processors one for ECU and one for TCU. I have successfully read the engine rom and then went to read the transmission rom but with no luck. i have moved the boot pin from pin 26 to pin 27 on the Datalink connector as outlined here:https://www.evoscan.com/technical-vehicle-manuals/12-mitsubishi-diagnostics But I'm getting the below error in Ecuflash and I'm wondering if i would be able to dump the TCU rom with MMCflash if I was to purchase it? sending init sequence 2 got 0x10 response instead of 0x11 sending init sequence 3 entering bootloader sending kernel size (2029) error sending kernel size interface close Цитата
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.